Skip to content

News

One Rack, Full Gym: 6-Move Dumbbell Workout for Small Spaces at Home - IRONBAY Fitness

One Rack, Full Gym: 6-Move Dumbbell Workout for Small Spaces at Home

One rack, one set of dumbbells, one small corner. 6 moves, 3 sets each, about 30 minutes.

Learn more
Cable Glute Workout at Home: 5 Moves With Ankle Straps - IRONBAY Fitness

Cable Glute Workout at Home: 5 Moves With Ankle Straps

Cable ankle straps turn any low pulley into a glute machine. 5 moves, 20 minutes, one $12 pair. Full form guide + workout.

Learn more
Quiet Deadlift at Home: 20-Minute Workout That Won't Wreck Your Floor - IRONBAY Fitness

Quiet Deadlift at Home: 20-Minute Workout That Won't Wreck Your Floor

Deadlift at home without cracked floors or angry neighbours. A 20-minute quiet deadlift workout, plus the crash pads and mats that keep it quiet.

Learn more
Winter Arc Home Gym: 12-Week Strength Plan With One Machine - IRONBAY Fitness

Winter Arc Home Gym: 12-Week Strength Plan With One Machine

Winter Arc started on October 1. It ends on January 1. That gives you three months to build something real — and you are in week 3 right now. The idea is simple: show up, train on schedule, and let discipline do the work. No motivation tricks. No perfect program. Just a plan you can repeat for 12 weeks in your home gym. This plan uses one machine: the IRONBAY N1017. Smith machine, dual cable pulleys, lat pulldown, low row, pull-up bar, dip station, and landmine — all in one frame. You never have to switch equipment mid-workout. Key Takeaways 12 weeks, 3–4 sessions per week, about 45 minutes each. One machine covers the whole plan. The Smith bar moves on rails, and the spotter arms catch the bar. That makes heavy training alone at home much safer. Week 12 ends with a test day. You work up to a heavy single on the Smith squat and Smith bench, then log the numbers. Same idea as the garage-gym max test that wrapped on October 10. The 12-Week Plan Weeks 1–4 — Base. Train 3 days per week. Learn the 6 moves below. 3 sets of 10 reps each. Rest 90 seconds between sets. Weeks 5–8 — Build. Train 4 days per week. Add one set, or a little weight, each week. 3–4 sets of 8 reps. Rest 90 seconds between sets. Weeks 9–12 — Peak and Test. Train 4 days per week. 4 sets of 6 reps on the Smith moves. In week 12, skip the normal session once and do a test day: warm up, then work up to one heavy single on the Smith squat and one on the Smith bench, with the spotter arms set. Write both numbers down. That is your Winter Arc result. The Workout (About 45 Minutes) Do these 6 moves in order. Rest 90 seconds between sets, 2 minutes between moves. 1. Smith Machine Squat — 4 sets of 8 reps. Stand with feet shoulder-width apart, bar across your upper back. Sit back and down until your thighs are about parallel to the floor. Knees track over your toes. Drive up through your whole foot. Set the spotter arms just below your lowest point before you start. 2. Smith Machine Bench Press — 4 sets of 8 reps. Place a bench inside the machine. Lower the bar to mid-chest with your elbows at about 45 degrees. Press up until your arms are straight. Do not shrug your shoulders at the top. 3. Lat Pulldown — 3 sets of 10 reps. Use the rear station with the 48-inch lat bar. Pull the bar down to your upper chest. Keep your chest tall. Let the bar rise slowly back up. Do not lean back to cheat the weight up. 4. Low Row — 3 sets of 10 reps. Sit at the rear station, feet on the footplate. Grab the straight bar. Pull it to your belly button. Squeeze your shoulder blades together for one second. Return slowly. 5. Cable Crossover — 3 sets of 12 reps. Set both pulleys at shoulder height. Step forward with one foot. Bring the handles together in front of your chest in a wide arc. Open slowly back to the start. 6. Landmine Press — 3 sets of 10 reps each side. Slide one end of a bar into the landmine sleeve. Hold the other end at your shoulder. Press it up and slightly forward. Keep your core tight so your hips do not twist. Switch sides and repeat. What You Need The IRONBAY N1017 packs a full strength gym into one frame: Smith machine, dual adjustable pulley system, dedicated lat pulldown and low row stations, multi-grip pull-up bar, dip station, spotter arms, footplate, and landmine attachment. It ships with J-hooks, spotter arms, dip handles, landmine, rowing footplate, a 48-inch lat pulldown bar, and a straight lat bar. © IRONBAY Fitness. Images not for commercial use. Specs that matter: dual 150 lb weight stacks (300 lb total) with a 2:1 pulley ratio. The Smith machine is plate-loaded for 2-inch Olympic plates and rated up to 1,500 lb. Footprint is 86.6 in wide by 59.1 in deep — about 22.6 sq ft. Height is 86.6 in, so it fits under a standard 8-foot ceiling with about 9 in to spare. Frame is 2 in by 3 in steel. Machine weight is about 860 lb. 2-year residential warranty. Not recommended for commercial use. Shop the IRONBAY N1017 All-in-One Functional Trainer with Smith Machine — $1,890. BUY NOW Shop online now. IRONBAY Fitness opens Nov 1, 2026. FAQ What is the Winter Arc challenge? It is a viral self-improvement challenge that runs from October 1 to January 1. The fitness part is simple: train on a fixed schedule for three months, eat well, sleep enough, and track your progress. No shortcuts. Consistency is the whole point. Can one machine really cover a full-body program? Yes. The Smith machine covers squats and presses. The cable pulleys cover flys, rows, and arm work. The rear station covers pulldowns and low rows. Add the landmine, dips, and pull-ups, and every major muscle group is covered. Is it safe to lift heavy alone at home? The Smith bar runs on rails and locks in place, and the spotter arms catch the bar if you fail a rep. Set the arms just below your lowest point, test them with a light weight first, and stop the set when your form breaks down. Never skip the safety setup. Will the N1017 fit in a garage with an 8-foot ceiling? Yes. The machine is 86.6 in tall, and an 8-foot ceiling is 96 in. That leaves about 9 in of clearance. Measure your space first: you need about 22.6 sq ft for the machine, plus room to walk around it and load plates. Updated October 15, 2026. New to training or coming back from an injury? Check with a coach or physio before you start.

Learn more
Landmine Workout at Home: 6 Moves for Full-Body Functional Strength - IRONBAY Fitness

Landmine Workout at Home: 6 Moves for Full-Body Functional Strength

One barbell, one handle, six moves. That is the whole landmine workout. A landmine setup is simple: one end of a barbell stays on the floor, the other end moves with you. The bar travels on a fixed arc, so your shoulders, hips, and core work hard while your joints stay in a friendly path. It is one of the best ways to train real-world strength at home — push, pull, hinge, squat, and rotate, all with one tool. This 20-minute landmine workout at home hits every one of those patterns. Key Takeaways 6 moves, 3 rounds, 20 minutes — a complete full-body home gym workout with one barbell and one landmine handle. The fixed arc of the bar makes presses and rows feel smooth and shoulder-friendly. Every round mixes strength and rotation, so you train power you can actually use in daily life. The Workout (20 Minutes) Warm up 2 minutes: arm circles, hip circles, 10 bodyweight squats, 10 easy torso twists. Then run the 6 moves below back to back. Rest 60–90 seconds between rounds. Do 3 rounds. Cool down 2 minutes: walk it out, stretch hips and shoulders. Start with just the empty bar. Add plates only when all 3 rounds feel smooth and controlled. The bar itself is your first weight — a 20 kg Olympic bar is plenty to learn with. The 6 Moves 1. Landmine Squat to Press. Hold the end of the bar with both hands at chest height, elbows tucked. Squat down until your thighs are near parallel to the floor, keeping your chest tall. Stand up, and press the bar up and forward in one smooth move. Lower it back to your chest. That is 1 rep. Do 8–10 reps. This is your full-body engine: legs drive, shoulders finish. 2. Single-Arm Landmine Press. Stand sideways to the bar, feet staggered. Hold the bar end in the hand farthest from the bar, at shoulder height. Brace your core, then press the bar up and slightly across your body. Let your hips turn a little with the press — that rotation is part of the move. Lower with control. Do 8 reps per side. Keep your ribs down; do not lean back to cheat the weight up. 3. Landmine Row. Face the bar, hinge at the hips with a flat back, knees slightly bent. Grab the bar end with one hand. Pull it toward your hip, elbow driving past your ribs. Squeeze your shoulder blade at the top, then lower slowly. Do 10 reps per side. Your back does the work; your torso stays still. 4. Landmine Rotations (Rainbow). Hold the bar end with both hands, arms mostly straight, bar at hip height on your right side. In a slow arc, sweep the bar up and over to your left side, turning your hips and shoulders with it. Your feet pivot naturally. Sweep it back to the right. That is 1 rep. Do 8 reps per side. Keep the move slow and wide — this is core control, not speed. 5. Reverse Lunge to Press. Hold the bar end with both hands at chest height. Step back into a reverse lunge, back knee dropping toward the floor, front shin near vertical. Stand up and press the bar forward as you rise. Lower the bar to your chest. Do 6 reps per leg. If balance feels shaky, do the lunge first, pause, then press. 6. Landmine Deadlift. Stand facing the bar, feet hip-width apart, bar end between your feet. Hinge at the hips, grab the bar end with both hands, flat back, chest up. Drive the floor away and stand tall, bar rising along its arc. Hinge back down with control. Do 10 reps. This trains the hip hinge — the same pattern as picking up a heavy box — with a very forgiving bar path. How to Set Up Your Landmine at Home You need two things: a barbell and a landmine handle. Wedge one end of the bar into a corner (a folded towel protects the wall), or use a landmine base if you have one. Slide the handle onto the free end of the bar. That is your grip point for every move above. Leave about 2 metres of clear floor around you, and keep plates off the floor in your swing path. A multi-grip handle gives you several hand positions in one tool: wide for rows, narrow for presses, neutral for rotations. A close-grip triangle attachment is a great second option for rows and pulldowns. Both slide onto a standard 50 mm Olympic bar sleeve. What You Need One Olympic barbell and one landmine handle. That is the whole setup — no rack, no cables, no extra machines. Shop IRONBAY Multi-Grip Cable & Landmine Handle — $160. Multiple grip positions for presses, rows, and rotations. Fits Olympic barbells and cable machines. Shop IRONBAY Close-Grip Cable & Landmine Attachment — $70. Neutral-grip triangle for rows and pulldowns. Shop IRONBAY Adjustable Neutral-Grip Row Handle — $45. 8″–17″ adjustable grip width, fits 2″ Olympic barbells. Shop IRONBAY 7 ft Olympic Bar (20 kg) — $150. 29 mm shaft, 850 lb rated capacity. The bar this workout is built around. BUY NOW © IRONBAY Fitness. Images not for commercial use. FAQ What is a landmine workout? A landmine workout uses a barbell with one end fixed on the floor. The free end moves on an arc while you press, row, squat, hinge, and rotate. The fixed path is joint-friendly and great for home gyms with limited space. Can you build muscle with landmine training at home? Yes. Landmine moves are loaded compound lifts — squats, presses, rows, deadlifts. Add weight slowly, keep reps in the 6–12 range, and progress week to week, just like any strength program. Do I need a landmine base, or is a corner enough? A corner works fine to start: wedge the bar end into a corner with a folded towel for protection. A dedicated landmine base or a handle attachment just makes setup faster and the bar more stable. Is landmine training good for beginners? Yes — it is one of the most beginner-friendly ways to learn pressing, rowing, and hinging. Start with the empty bar, learn the arc, and add plates only when form stays clean. Updated October 14, 2026. New to training or coming back from an injury? Check with a coach or physio before you start. Shop online now. IRONBAY Fitness opens Nov 1, 2026.

Learn more
Safety Squat Bar Workout at Home: 5 Moves for Stronger Legs - IRONBAY Fitness

Safety Squat Bar Workout at Home: 5 Moves for Stronger Legs

Squats hurt your shoulders or wrists? The safety squat bar fixes that. 5 moves, 30 minutes, one bar — full leg day at home. IRONBAY bar from $200.

Learn more
Cables Only: 7-Move Upper Body Workout at Home - IRONBAY Fitness

Cables Only: 7-Move Upper Body Workout at Home

Cable workouts are everywhere right now — and for good reason. With one cable setup and the right attachments, you can train your whole upper body at home: back, chest, shoulders, biceps, triceps. No gym membership. No waiting for machines. This cables-only upper body workout at home takes about 30 minutes. Seven moves, four attachments, zero guesswork. Run it 2–3 times per week and your back and arms will know about it. Key Takeaways 7 cable moves × 3–4 sets = a complete upper body workout at home in about 30 minutes. Cables keep tension on the muscle through the whole rep — that is the whole advantage over dumbbells. The #1 cable mistake is swinging the weight. If your torso moves, the weight is too heavy. The Workout (30 Minutes) Rest 60 seconds between sets. Pair moves 1+2, 4+6 as supersets to save time — do one set of each back to back, then rest 90 seconds. Wide-grip lat pulldown. 4 sets × 10–12 reps. 49" lat bar, overhand grip, wide. Seated cable row. 4 sets × 10–12 reps. V-style bar, chest up. Straight-arm pulldown. 3 sets × 12 reps. Light. Feel the lats stretch and squeeze. Tricep rope pushdown. 3 sets × 12–15 reps. Split the rope apart at the bottom. Overhead rope extension. 3 sets × 12 reps. Elbows pinned, reach tall. EZ curl bar cable curl. 3 sets × 10–12 reps. Squeeze at the top for one second. Rope face pull. 3 sets × 12–15 reps. Pull to the forehead, rotate knuckles up. The 7 Moves, Step by Step 1. Wide-grip lat pulldown. Sit tall, thighs locked under the pads. Grab the bar with a wide overhand grip. Lean back just a touch — about 10 degrees. Pull the bar down to your upper chest, driving your elbows down and back. Let it rise slowly for a full stretch. No jerking. 2. Seated cable row. Feet braced, knees soft, back straight. Grab the V-style bar with both hands, palms facing each other. Sit up tall. Pull the bar to your lower ribs, squeezing your shoulder blades together for one second. Let your arms reach forward until you feel a stretch in your back. Do not round your lower back. 3. Straight-arm pulldown. Stand facing the cable, bar at shoulder height. Arms straight but elbows not locked. Push the bar down to your thighs in an arc, like a straight-arm dive. Only the shoulders move. This is a finisher for the lats — go light and chase the squeeze, not the stack. 4. Tricep rope pushdown. Elbows pinned at your sides, rope in both hands. Push down until your arms are straight, then split the rope apart at the bottom — that final spread is where the triceps fully contract. Let it rise slowly. If your elbows drift forward, the weight is too heavy. 5. Overhead rope extension. Face away from the cable or use a low pulley facing it. Rope overhead, elbows pointing forward, not flaring out. Extend up until your arms are straight. The stretch at the bottom is the money rep — pause there half a second. 6. EZ curl bar cable curl. The angled grip keeps your wrists happy. Stand close, elbows at your sides. Curl up, squeeze hard at the top for one second, lower for two to three seconds. The cable never lets the tension off — that is why this burns more than a dumbbell curl. 7. Rope face pull. Set the cable at face height. Grab the rope with thumbs toward you. Pull to your forehead while rotating your knuckles up — finish with your fists beside your ears. This builds the rear delts and upper back, the muscles that fix slouchy posture from desk work. The #1 Cable Mistake Using momentum to move the stack. You see it on every pulldown: body rocking back, hips lifting, arms doing half the work. The cable keeps tension only if you stay still. Fix it: pick a weight you can move with zero torso swing. Two seconds up, one second squeeze, two to three seconds down. When all reps look the same — first rep and last rep — then add weight. © IRONBAY Fitness. Images not for commercial use. What You Need One cable machine or functional trainer, plus four attachments. Each one clips on with a standard carabiner — swap them between moves in seconds. Eyries™ 49” Aluminum Lat Pulldown Bar — $75.00. CNC-machined aluminum, 1.2 mm knurling, angled wide grips, revolving center. The bar for moves 1 and 3. Shop the Lat Pulldown Bar Multi-Purpose V-Style Cable Bar — $45.00. Wide V shape, rubber grips at both ends, exposed steel center for extra hand positions. The bar for move 2. Shop the V-Style Cable Bar Tricep Rope — $15.00. Heavy-duty braided nylon with rubber ball stops. The attachment for moves 4, 5, and 7. Shop the Tricep Rope EZ Curl Bar Cable Attachment — $45.00. Chrome-plated steel with textured rubber grips and EZ curl angles for wrist-friendly curls. The bar for move 6. Shop the EZ Curl Bar Attachment Shop online now. IRONBAY Fitness opens Nov 1, 2026. BUY NOW FAQ Can you build muscle with cable machines alone?Yes — cables are a proven muscle-building tool. Constant tension, smooth resistance curves, and joint-friendly angles make them great for hypertrophy. Plenty of lifters build their whole upper body on cables. How many cable attachments do I actually need?Four covers almost everything: a wide lat bar for pulldowns, a close-grip handle or V-bar for rows, a rope for triceps, and an EZ curl bar for curls. Start with the rope and a bar, add the rest over time. Do cable attachments fit any cable machine?Any standard carabiner connection works — home cable machines and dual-stack functional trainers all use the same eyelet-and-carabiner setup. If your machine has a carabiner, the attachment fits. How often should I do this workout?Two to three times per week with at least one rest day between sessions. Upper body recovers well, but the constant tension of cables adds up — treat it like strength training, not cardio. Updated: October 12, 2026. New to training or coming back from an injury? Check with a coach or physio before you start.

Learn more
Hip Thrust at Home: The 20-Minute Glute Workout - IRONBAY Fitness

Hip Thrust at Home: The 20-Minute Glute Workout

Build stronger glutes at home with this 20-minute hip thrust workout — 6 moves, form cues, and the #1 mistake to avoid.

Learn more
Foam Roller Reformer Workout at Home: 7 Moves for Core & Mobility - IRONBAY Fitness

Foam Roller Reformer Workout at Home: 7 Moves for Core & Mobility

Reformer Pilates is all over social media right now — and so is the home hack. Put a foam roller under your spine or your feet, and basic moves turn into unstable, core-burning work. It is not a reformer. But it trains the same thing: deep core control, slow movement, and full-body awareness. This 20-minute foam roller workout at home blends Pilates-style core moves with classic foam rolling. Seven moves. One roller. Zero guesswork. Key Takeaways 7 moves × slow, controlled reps = a 20-minute home foam roller workout for core, mobility, and recovery. A foam roller under your spine or feet adds instability — that is what makes Pilates-style moves work without a reformer. The #1 mistake is rolling too fast. Eight slow rolls beat thirty fast ones. Breathe, and never roll directly on a joint or your lower back. The Workout (20 Minutes) Go in order. Rest 30 seconds between moves. New to this? Cut every rep count in half for week one. 0:00 — Roller deadbug. 8 reps per side. Spine along the roller, slow and wobbly. 3:00 — Roller glute bridge. 12 reps. Feet on the roller, hips up, squeeze two seconds. 6:00 — Thoracic opener. 10 slow passes. Roller across the mid-back, open the chest. 9:00 — Quad roll. 8 slow rolls per leg. Hip to just above the knee. 12:00 — IT band roll. 8 slow rolls per side. Gentle — this one is spicy. 15:00 — Glute roll. 30 seconds per side. Figure-4 seated position. 17:30 — Calf roll + long stretch. 8 rolls per leg, then a 60-second full-body stretch to finish. The 7 Moves, Step by Step 1. Roller deadbug. Sit on the floor, place the roller lengthwise behind you, and lie back so your whole spine rests on it — head included. Knees bent, feet flat. Raise both arms toward the ceiling. Now slowly extend your right arm overhead and your left leg long, keeping your ribs down. Return, switch sides. The roller wobbles. That wobble is the workout: your deep core has to stabilize every rep. 2. Roller glute bridge. Lie on your back, roller crosswise under your feet, knees bent. Press through your heels and lift your hips until your body forms a straight line from shoulders to knees. Squeeze your glutes hard for two seconds at the top. Lower slowly. The roller wants to slide — fight it with your hamstrings and glutes. 3. Thoracic opener. Place the roller across your mid-back (perpendicular to your spine), hands lightly behind your head. Lean back over the roller and take a big exhale. Roll two inches down your back, lean back again. Ten slow passes from mid-back to just below the shoulder blades. Never roll your lower back or your neck directly on the roller. 4. Quad roll. Face down, roller under your thighs, forearms on the floor. Roll slowly from hip to just above the knee — eight passes per leg. When you hit a tender spot, stop and breathe on it for five seconds instead of rushing past. 5. IT band roll. Lie on your side, roller under your outer thigh, bottom leg straight, top foot planted on the floor in front for support. Roll from hip to knee, eight slow passes per side. Keep the pressure moderate. Sharp pain means back off — this area does not need force, it needs patience. 6. Glute roll. Sit on the roller, cross your right ankle over your left knee (figure-4), and lean into your right hip. Make small, slow shifts instead of big rolls — 30 seconds per side. This one finds the spots sitting all day creates. 7. Calf roll + long stretch. Seated, roller under your calves, hands behind you on the floor. Roll from ankle to knee, eight passes per leg. Then lie back, legs long, arms stretched overhead on the floor — the long stretch. Hold 60 seconds and breathe deep. Done. The #1 Foam Roller Mistake Rolling too fast. Most people treat a foam roller like a rolling pin and zip up and down in two seconds. Speed kills the benefit — the muscle never gets a chance to release. Go slow. One full pass should take about five seconds. Pause and breathe on tender spots. Skip joints and the lower back entirely. Eight slow rolls beat thirty fast ones, every time. © IRONBAY Fitness. Images not for commercial use. What You Need One foam roller. That is the entire home gym for this workout — no reformer, no rack, no extras. IRONBAY Foam Roller — $18.00. 17.7" × 4.7" (45 × 12 cm) with a textured grid surface for targeted pressure. Compact enough to slide under a bed. Shop the Foam Roller Shop online now. IRONBAY Fitness opens Nov 1, 2026. BUY NOW FAQ Can a foam roller replace a Pilates reformer?No — and do not let anyone sell you that idea. A reformer has springs, straps, and a moving carriage. A foam roller gives you instability training for deep core control, which is a solid home stand-in for core work, not a replacement for the machine. Should I foam roll before or after a workout?Both work. Before training, spend 3–5 minutes on the muscles you are about to use — it wakes them up. After training, go slower for 5–10 minutes to wind down. This 20-minute session also works great as a standalone recovery day. Is foam rolling supposed to hurt?Pressure, yes. Sharp pain, no. Aim for a 6 or 7 out of 10 on the "good hurt" scale. Back off if you feel shooting pain, numbness, or pain in a joint — and never roll directly on your lower back or neck. How often should I use a foam roller?Daily is fine. Rolling is low-impact, so 5–10 minutes a day beats one long session a week. Consistency matters more than intensity here. Updated: October 10, 2026. New to training or coming back from an injury? Check with a coach or physio before you start.

Learn more